Equipment

ITSC-361-Z1 3G In-vehicle system

Share on FacebookShare on Google+Tweet about this on Twitter

ITS-C-361-Z1 in-vehicle system uses GPS+GLONASS dual mode satellite positioning to raise the precision level of product positioning. The internal G-sensor module also provides 3-axis sensor measurements. The vehicle owner can be notified for actions upon occurrence of a special event.
Provides multiple I/O (including ACC and SOS defined I/O and two I/O to be defined by users, with1 Analog input and 3 outputs). One RS-232 interface is also available for interface with peripheral devices. The RS-232 interface can be expanded by an extension hub to meet the requirements of customers with additional peripheral devices.

ITSC-361-3G

Diagram of external extension hub

 

ITSC-361-Z1車機

Device specification

  • Size
    • 95 mm(L) x 68 mm(W) x 25 mm(H), antenna not included
  • Weight
    • 200 g (processor, including battery)
  • Input voltage
    • DC 9V ~ 36V
  • Working environment
    • Temperature
      • -20℃ ~ 80℃
    • Humidity
      • 93% (under the condition of 40℃)
  • Emergency button
    • Allows external interface with emergency button
  • Signaling lights
    • Red light:
      • Connected and charging status
    • Orange light:
      • GSM/GPRS/3G and GPS signaling
    • Blue light:
      • Power Status
  • Internal antenna
    • Nil; external connection with 3G and GPS antenna required
  • Data communication
    • GSM/GPRS Module 850/900/1800/1900 MHz
    • UMTS/HSPA Module 800/850/900/1700/1900/2100 MHz
  • Satellite positioning
    • ublox 7
    • Precision GPS:2.5 m CEP GLONASS:4.0 m
  • Battery 1,000 mAh (non-removable)
    • When the in-vehicle system experiences power failure, the system will transmit positioning information once every 30 seconds and can continue with such transmission for about 3.5 hours (under good communication condition)
  • No. of strokes stored in specific area
    • ≦500 strokes

Software features

  • Power function
    • System on
      • Linked to the vehicle’ s ACC
      • Delayed switched off time can be set at backstage
  • Peripheral extension functions
    • Interface with peripheral devices
      • Allows interface with cold chain logistics thermometer/li>
      • Allows interface with regular or anti-metal RFID
      • Allows interface with exhale alcohol detector
      • Allow interface with serial camera
      • Allows interface with biometric fingerprint reader
      • Allows interface with barcode reader
      • Allows interface with LCD dispatch touch screen
  • Status reporting function
    • Automatic reporting
      • Fixed interval reporting of GPS positioning (frequency can be set by the platform)
      • Over speed reporting (upper speed limit can be set by the platform)
      • Cold chain failure event reporting (upper and lower temperature limits can be set by the platform)
      • Zonal entry and exit reporting (zone locations and boundaries can be set by the platform)
      • Tow-away event reporting
      • Movement event reporting
      • Follow up return transmission of data not transmitted due to poor communication
    • Passive reporting
      • Self-checking of in-vehicle device (checking orders sent by the platform)
      • OTA over-the-air updates (update orders sent by the platform)

Hardware features

  • External design specification
    • Size: L95 x W68 x H25 mm (external antenna not included)
    • Weight: 200 g (including internal standby battery)
  • Power source specification
    • Operating voltage range: DC 9 V ~ 48 V
    • Power consumption (when standby battery is full)
      • Standby 30mA@DC 12 V
      • GPS in operation 43mA@DC 12 V
      • GSM/GPS in operation 70mA@DC12 V
      • Maximum consumption 500mA@DC 12 V (when charging 0.4 A@4.2 V)
    • Open-collector output power
      • Maximum load: 250 mA
      • Maximum voltage: DC60 V
    • Standby battery: internal standby battery 1000mAH
    • Operating temperature: -20℃ to 80℃
  • I/O I/O input/output
    • Digital input : 4
    • Including ACC and SOS defined I/O, and two I/O to be defined by users
    • Analog input :1
    • Open-collector output : 3
    • Extension hub (RS-232):1
  • Cellular module specification
    • Model: Cinterion EHS5-E
    • Frequency band and maximum emission power
      • GSM/GPRS/EDGE:Dual band GSM 900/1800MH
      • UMTS/HSPA+:Dual band UMTS 900/2100MHz
    • SIM card interface:Supports 1.8 V and 3 V
    • Internet connection speed
      • HSPA: DL 7.2 Mbps, UL 5.7 Mbps (3GPP Release 6, 7)
      • UMTS:PS data rate – 384 kbps DL / 384 kbps UL ; CS data rate – 64 kbps DL / 64 kbps UL (3GPP Release 4)
  • GPS Module Specification
    • Model: u-blox MAX-7Q
  • Reception mode
    • Channel 56 frequency
    • GPS / QZSS / GLONASS L1 C/A
  • Precision Level
    • 2.5m (50% CEP)
  • GPS antenna type
    • External mode